How Can I Make Clear Plastic Cases Look Nice Again

Download Article

Download Commodity

Clear phone cases wait great—until they get dirty. Since telephone cases get inundated with all sorts of pocket debris and finger oil, they stain and even turn yellow very hands. Fortunately, yous can foreclose this from happening with some household cleaners. Dish soap is good for regular maintenance, simply use rubbing booze or baking soda for tougher stains. Whether your instance is plastic or safe and silicone, you tin wash information technology to prevent information technology from discoloring. With regular maintenance, your example will even terminal longer than information technology unremarkably would.

1. 1

   Mix warm h2o and dish soap in a pocket-size bowl. Pour 1 cup (240 mL) of warm water into the bowl, so add about 2 to 3 drops of soap. You tin use whatever dish soap yous have on manus, only it'southward best to employ a mild soap. Stir it in until the water is soapy.^[one]

   • Mild dish soaps aren't designed to cutting through heavy grease and don't have potent artificial scents. There is a take chances that harsh cleaners could damage your case.
   • Dish soap is great for removing mild stains and removing debris that could cause new stains to form.

2. 

   2

   Scrub the case with a clean toothbrush dipped in the soapy h2o. Remove your telephone from the case commencement and set it somewhere far from the h2o. Brush the entire example, especially in spots where you notice stains. Try scrubbing around stained spots in a circle. Make sure you besides become the castor into the case'south smaller spots, such as around the camera and charge port openings.^[2]

   • Yous tin employ a cloth or sponge to wipe the case clean, only yous won't be able to get into the nooks and crannies without a brush.

   Advertisement

3. 

   iii

   Rinse the case off in clean water. Hold it off under running water in your sink. Brand certain yous eliminate all of the soap, including in the hard-to-reach spots. If there is whatever debris left on the case, scrub it again with a toothbrush, applying more soapy water as needed.^[iii]

4. 

   4

   Dry the case off with a clean towel. Milkshake off the excess moisture, then wipe the entire case from front end to back. Try to remove as much of the remaining moisture as possible. It will finish air drying faster if you're able to wipe it adequately dry first.^[four]

   • Remove as much of the moisture as possible so your example can finish air drying faster.

5. 

   5

   Identify the case on a countertop for 1 hr to air dry. Since the instance will probably have some moisture on information technology, don't put it on your phone right away. Set it in an open spot with plenty of air circulation. Spread out a make clean towel there, then identify the phone example on pinnacle of it. Let it finish drying out before putting information technology back on your telephone.^[5]

   • Make certain the instance is completely dry. Water can linger in the smaller spaces, similar the hole for the charging port, and cease upwards inside your phone.

6. 6

   Launder your phone case weekly to prevent stains from forming. Your phone case comes into contact with lots of debris, so frequent cleaning is a adept idea. If you have the time, accept out your phone to give the case a thorough scrubbing with lather and water at least once a week. It will prevent the material from yellowing, too.^[6]

   • Your phone case will collect lots of debris from your pocket or purse. It too gets enough of oil from your hands, causing it to plough yellow over time.
   • Your instance will final much longer if you spend time maintaining it.

   Advertisement

1. 

   ane

   Dampen a clean microfiber textile lightly in rubbing booze. Remove your phone from the instance first. So, cascade the rubbing alcohol onto a modest cloth. Use only a fiddling fleck of the rubbing alcohol. Shake and wring out the excess wet before cleaning your example.^[seven]

   • Rubbing alcohol, or isopropyl alcohol, is good against medium stains you can't remove only past washing with lather and water. Even if information technology fails to remove a stain, information technology eliminates bacteria.
   • Rubbing alcohol can potentially discolor some clear cases, so double-check with the manufacturer before using information technology. Test information technology out in an inconspicuous spot first. Use it only when necessary and don't soak your case in it.

2. 

   2

   Scrub the stains on the case in a circle with the damp cloth. Motion the phone example into your sink and clean information technology there. Wipe the case in a circumvolve, putting extra try into whatever tougher stains you meet. Make sure you lot besides get the difficult to attain spots, like the instance's corners and openings.^[8]

   • Another option is to use a spray canteen to use rubbing alcohol straight to the case. Be conscientious to avoid soaking the case, since y'all merely need to apply a petty bit of the rubbing alcohol to clean information technology.
   • If yous have rubbing booze-soaked cleaning wipes, you lot can apply those as well.

3. 

   three

   Wipe the example dry out with a make clean microfiber cloth. Take a 2d cloth and go back over the entire case. Make certain you remove all of the rubbing alcohol. Any remaining dirt or debris on the case should also come off. Remember to likewise make clean out the tough-to-reach areas, like around the instance'south inside edges.^[9]

4. four

   Wait almost one hour for the instance to air dry earlier putting it on your telephone. Fix the instance out in an open area, like on a countertop or table. Open up nearby windows or turn on fans if you accept to in society to go a skillful typhoon blowing through the room. Once the case finishes drying, you can safely put it back on your phone.^[10]

   • Rubbing booze dries much faster than water does, simply you should leave the case to dry for a while in order to protect your phone from moisture harm.

   Advertisement

1. 

   1

   Sprinkle baking soda over the entire case. Accept your telephone out and set it aside. Place the example in your sink or on superlative of a make clean towel. Position it so the stains are face upward. Then, cover the surface with blistering soda. Make sure the stains are completely covered in baking soda.^[eleven]

   • You can't really use too much baking soda, so keep calculation more until the case and its stains are well-covered.
   • Baking soda is constructive on tough stains that you're unable to remove whatever other way.

2. 

   2

   Scrub the phone case with a wet toothbrush. Take a clean toothbrush and dampen it in a footling flake of water. Then, move information technology in a circle over the case. Make sure you go the spots that are tough to reach, such as the edges and openings.^[12]

   • If the toothbrush starts to dry out, dampen information technology in more h2o. You tin hold it nether running water in your sink or dip it into a bowl filled with water.

3. 

   3

   Rinse the phone case off in clean h2o. Motility the example into your sink if it isn't there already and turn on the warm water. Wash off the entire case, using a toothbrush to knock loose any remaining debris. Keep scrubbing and rinsing information technology until all of the baking soda is gone.

4. 

   iv

   Wipe the example dry out with a make clean cloth. Shake out the excess moisture first. Later on, clear off as much of the remaining moisture and any leftover debris as well. Pay particular attention to smaller areas like the case's corners and openings.^[thirteen]

   • Eliminate as much of the wet as possible to ensure your instance air dries as fast as possible.

5. 

   five

   Launder your case with soap and water if it however looks dingy. Mix together about ane cup (240 mL) of warm water and 2 to three drops of liquid dish detergent in a bowl. Stir the water until it's nice and soapy. Then, wipe downwards the entire case with a sponge, cloth, or even a toothbrush. Clear off any remaining debris.^[14]

   • The blistering soda will remove tougher stains, only you may still encounter some lighter ones left later on. You may also notice some leftover baking soda that has to be cleared out with soap and water.

6. 6

   Air dry the example for about 1 hour before using it over again. Choose a spot in your domicile that is out in the open, such as a kitchen table or countertop. Wipe the example dry as much as possible first. And then, identify a clean towel over the surface and lay your telephone case on top of information technology. The example will finish drying out every bit you lot wait.^[15]

   • Make sure the spot you choose has plenty of air circulation. Y'all tin open windows or turn on nearby fans to become air flowing through the room.
   • Keep in mind that the case won't dry out as apace in dark or cool areas.

   Advertisement

Enquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

• At that place are many strategies people have for removing serious yellowing from telephone cases, but they aren't very constructive. Bleaching, for example, doesn't actually work and can permanently ruin your case.

• If your case is yellow or otherwise looks a piddling unpleasant, your best bet is usually to replace it. Cases are relatively inexpensive, and old ones are difficult to maintain once they start wearing out.

• Once a articulate case starts turning yellow, you tin can't restore it back to its original condition. The only way to prevent a example from yellowing is through regular cleaning.

Thanks for submitting a tip for review!

Advertisement

• Y'all can easily transfer moisture from the instance to your phone if you're not careful. To avoid problems, always take the telephone out before cleaning its case, and so let the case fully air dry out before putting it back in.

Advertisement

Things You'll Demand

• Mild dish soap
• Mixing bowl
• Measuring cup
• Toothbrush
• Towel or cloth
• Sink

• Rubbing alcohol
• Microfiber material
• Sink
• Spray bottle (optional)

• Baking soda
• Toothbrush
• Sink
• Towel
• Dish soap (optional)
• Mixing bowl (optional)

Nigh This Article

Commodity Summary X

To go on your clear phone example clean, scrub it with soapy water and a toothbrush once a calendar week. If information technology's already stained, endeavor wiping it down with rubbing alcohol and a fabric. Let it dry for ane hour before you put your telephone back in it. For really stubborn stains, baking soda is a lifesaver. Sprinkle a liberal amount over your telephone case, then scrub it into the stains with a wet toothbrush. Rinse off the baking soda with warm water, let your case dry for 1 hour, and voila! For step-by-step instructions with videos, check out the total article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 102,347 times.

Is this article upwardly to appointment?

biancowies1942.blogspot.com

Source: https://www.wikihow.com/Keep-a-Clear-Phone-Case-Clean

Share this post